Axis AU LogoClass A1R & B Heat Detector

VEGA detectors communicate on a fully digital protocol. 

The analogue addressable heat detector incorporates a single, centrally positioned, thermistor which supervises ambient temperature with low thermal inertia, allowing the product to achieve A1R and B classification. 

The detector employs powerful algorithms to analyze the status of the protected area whilst guaranteeing a high rejection to false and unwanted alarms. 

The V350 thermal detector can be configured via the control panel to be an EN54-5 A1R or EN54-5BS operating device. 

A unique range of Decorline finishes are available.

Key Features

  • SAI Global 5 Tick Quality Scheme Accredited
  • Large capacity, up to 240 devices per loop
  • Auto addressing capability (by the control panel) or manually using VPU100 handheld programmer
  • Digital protocol allow quick & accurate information
  • High reliability and error detection
  • Short circuit isolators in each device to the requirements of EN54-17 (no Australian equivalent)
  • Day / night operation
  • Digital checking of double address - Line quality information
  • Line quality information
  • Utilise the hand held programmer to change between Rate of Rise and Fixed temperature modes
  • 360˚ visible red LED driven by the control panel
  • Magnet test feature
Specification

Voltage  Range

From 15Vdc to 40Vdc 

Average current consumption 

20mA (at 24Vdc) 

Output Driver Current

Iout = 20mA @ 24V

LED Current Consumption

Iled = 20mA @ 24V

Operating Temperature range

From – 30°C to +50°

Tolerated humidity range (no condensing) 

From 5% RH to 90% RH 

Dimensions (H x Diameter)

110 x 54mm

Order Codes and Options

LV350: Heat Detector
VB100: Standard Base
DSB100: Deep Base
BLR100: Relay Base
VPU100: Programmer

Enhanced Multi Criteria Detector Test Image